Swirl valve CEV 350 KPS. 15l/s. Tube 160mm. Head 1m. Stainless steel 316L

Removable swirl valve type KPS is equipped with coupling piece, mounting plate 292x292mm and tie rod. Coupling piece/sliding piece 154mm. Rod length 150cm. To be mounted on a flat wall. (Round pit is possible, pit diameter must be specified). Pit dimensions at least 700x700mm internally. The swirl valves limit the flow in the pipe system, using the pressure head on the supply side. Submerged swirl valve with infinitely adjustable inflow opening. A tension rod between the swirl valve and the manhole opening allows the valve to be removed for cleaning or maintenance. It is necessary to place a manhole cover above this tie rod. Medium rainwater, for disconnecting RWA from DW systems in newly improved separated sewer systems and discharge from other sediment systems. Favorable drainage characteristic with high self-cleaning in the pipe system. Stainless steel AISI 316L (1.4404). For type CE/V with a so-called 'drowned' inlet, there must be a height difference of 0.40 meters between the outgoing pipe and the bottom of the pit. The valve is mounted in front of the discharge pipe by means of a plate. A coupling is welded to this plate in which the swirl valve slides. The supply and discharge pipes may be at the same height. If the supply pipe is a storage pipe, we recommend this pipe to be approximately 5 to 10 cm. higher than the drain pipe, for the self-cleaning effect. Stainless steel mounting anchors M10 are included