Swirl valve CEV 200 P. 1l/s. Pipe 160mm. Delivery head 0,66m. Stainless steel 316L

Fixed vortex valve type P is equipped with mounting plate 292x292mm. To be mounted on a flat wall. (Round pit is possible, pit diameter must be specified). Pit size minimum 400x400mm internal The vortex valves limit the flow in the pipe system, using pressure head on the supply side. Medium rainwater, for disconnecting rwa on dwa systems in again improved separated sewer systems and discharge from other sedimentation systems. Favourable discharge characteristic with a high self-cleaning in the pipe system. Stainless steel aisi 316L (1.4404). For type CE/V with a so-called 'flooded' inlet, there must be a height difference of 0.40 meters between the outgoing pipe and the pit bottom. The valve is mounted by means of a plate in front of the discharge pipe. The supply and discharge pipes may be at the same height. If the supply pipe is a storage pipe, we recommend this pipe approx. 5 to 10 cm. higher than the discharge pipe, in connection with the self-cleaning effect. Stainless steel fixing anchors M10 are supplied. The type CEV P is used in places where it is desirable that the swirl valve cannot be easily dismantled.