Swirl valve CEV 200 KPS. 1l/s. Pipe 160mm. Delivery head 0,66m. Stainless steel 316L

Removable vortex valve type KPS is equipped with coupling piece, mounting plate 292x292mm and tie rod. Coupling piece/sliding piece 108mm. Rod length 150cm. To be mounted on a flat wall. (Round pit is possible, pit diameter must be specified). Pit mooring minimum 400x400mm internal The vortex valves limit the flow in the pipe system, using pressure head on the supply side. Submerged vortex valve with continuously adjustable inlet opening. The valve can be removed for cleaning or maintenance by means of a tie rod between the vortex valve and the manhole opening. It is necessary to place a manhole cover above this tie rod. Medium rainwater, for disconnecting rwa on dwa systems in again improved separated sewer systems and discharge from other sediment systems. Favourable discharge characteristics with a high self-cleaning in the pipe system. Stainless steel aisi 316L (1.4404). For type CE/V with a so-called 'flooded' inlet, there must be a height difference of 0.40 metres between the outgoing pipe and the bottom of the well. The valve is mounted by means of a plate for the discharge pipe. A coupling is welded to this plate in which the swirl valve slides. The supply and discharge pipes may be at the same height. If the supply pipe is a storage pipe, we recommend laying this pipe approx. 5 to 10 cm higher than the discharge pipe, in connection with the self-cleaning effect. Stainless steel mounting anchors M10 are included