Oil separator alarm Labkotec idset-34 Oil alarm. 5m cable

idSET-34 is an alarm system intended for monitoring liquid levels, in particular in oil, petrol and sludge separators. The system consists of an idSET-34 control unit for wall mounting and idOil sensor with standard 5m cable that is installed in the separator. The sensor cable can be extended with a junction box. Up to three different types of sensors can be connected to the control unit which can be used to detect the following: Oil layer thickness (idOil-OIL oil sensor), High liquid level (idOil-LIQ back-up sensor), Sludge layer thickness (idOil-SLU sludge sensor). The device's LED indicator lights indicate sensor alarms and errors. In alarm and error situations, the buzzer sounds an alarm and the potential-free relays are switched to the alarm position. The 4 relays are of the failsafe type, which means that they also go into alarm status when the power supply fails. The idOil sensors and cable are EX standardized and may be installed in an explosion-hazard area. IP rating cabinet IP65. Ambient temperature -30 to +60 degrees C. 4 relay outputs 5A, 250V AC/30V DC, 100 VA potential-free. Ex classification cabinet Ex II (1) G [Ex ia Ga] IIB. Ex classification sensor Ex II 1 G Ex ia IIA T5 Ga. Sensor measuring principle Conductive. Sensor IP rating IP68. Cable type 2x0.75mm2 PUR unshielded. Display LED lights alarm status. Weight 650g. Wall mounting. Medium Gasoline, Biodiesel, Diesel, Lubricating Oil. Power supply AC 230V 50-60 Hz. Housing material Polycarbonate. Wxhxd=175x125x50mm