Sand trap RI 100N11. L=0.5m. F900KN. Ondine grid

Self-supporting sand trap Type I in accordance with EN1433. High-quality self-compacting concrete C55/67 with a reinforcement mesh. 100% recyclable cast iron and concrete. Resistant to frost, weather, salts, oil and petrol, etc. Due to its design, the sand traps have a built-in resistance of strength class F, 900 kN. The proposed resistance is guaranteed by the whole. The sand traps have a tongue and groove connection and a recess for a safety joint (SF). If the design is liquid-tight, this recess must be sealed. The top of the sand trap is equipped with an integrated edge protection made of galvanized steel (thickness 4 mm), anchored in the concrete (height 3 cm). The sand trap complies with the European Standard EN1433. Dimensions: length 50 cm; inner width 10 cm; outer width 17.2 cm; fixed height 49 cm. A cast-in sleeve is provided on one side for connection to the sewer with Ø 125 mm. On the other side there is a knockout with a diameter of 160 mm. This can optionally be used for an additional connection to the sewerage system. Weight 72kg. Aesthetic ONDINE grille made of nodular cast iron FGS 500-7, length 50cm. Pre-mounted on the gutter using a patented mounting system. Grille consisting of elongated undulating openings of 14 mm specially designed to meet the needs of people with reduced mobility. Thanks to the exceptional properties of the grille surface (anti-slip, channeling effect), maximum absorption capacity is guaranteed. The grate complies with load class F, 900 kN according to European Standard EN 1433. The self-supporting drain channels allow installation without a lateral concrete jacket (only a foundation is necessary). Installation manual available on request.